µ-Dimension BST 1200es, User Manual

Page: 39 / 74

Dimension BST 1200es / SST 1200es User Guide
Operation 39
2. If a part has been sent to the printer for build (there is at least
one part in the build queue), but is not building:
a. The panel displays
Ready to Build
.
b. The name of the first model in the build queue is displayed.
c. The amount of material remaining in the model material
cartridge and the support material cartridge (e.g. Mod
90%, Sup 85%) is displayed.
NOTE
If a material amount is flashing, it indicates that the
remaining material will NOT be sufficient to complete
the current build.
d.
Start Model
is blinking. Press the
Start Model
button
to begin building the displayed part.
Sending Your CAD File to the System
This section describes the procedures used for sending your own
CAD files to Dimension.
Send a “job” to Dimension:
1. Create an STL file with your CAD software.
2. Click on the CatalystEX icon on the desktop of your PC. The
CatalystEX main window opens ( Figure 13 on page 40 ).