u-blox XPLR-AOA-3, User Manual

Page: 6 / 44

UBX-22006906 - R03 Page 6 of 44
C1-Public
2 Product description
Comprising an ANT-B10 antenna board, EVB-ANT-1 development platform and C209 tag, the XPLR-
AOA-3 explorer kit provides a complete Angle of Arrival anchor point
– and all you need for developing
direction-finding and indoor positioning applications.
The antenna board runs proprietary u-connectLocate software, while the development board runs an
open-source demonstration software that relays angle events from the antenna board. The C209 tag
runs example, open-source, tag software. All the cables and adapters that are necessary for
mechanically connecting the boards are also included in the kit.
An off-the-shelf, pin header on EVB-ANT-1 allows easy connection to ANT-B10 and a ready-to-use
AoA indoor positioning anchor point.
Figure 1 shows the main components of the LPR-AOA-3 kit including EVB-ANT-1 development
platform, ANT-B1 antenna board and C209 tag
Figure 1: XLPR-AOA-3 kit including EVB-ANT-1 (left), ANT-B1 antenna board (center) and C209 tag (right)
2.1 Kit includes
•
EVB-ANT-1 board
• ANT-B10 antenna board (hosting the NINA-B411 Bluetooth Low Energy module)
• C209 tag (hosting the NINA-B406 Bluetooth Low Energy module)
• Mounting materials. For mounting instructions, see Assembling the kit.
o
Single plexiglass mounting panel
o
Four 30 mm M3 standoffs
o
Four 8 mm M3 standoffs
o
Four M3x6 screws