NINA-B1 series - System Integration Manual
UBX-15026175 - R06
Software
Page 24 of 48
2.3.1.1
s-center
To flash the module using s-center,
1.
Select
Tools
>
Firmware Update
as shown in the following screenshot:
2.
Select the file that contains the bootloader and SoftDevice.
3.
Set the correct COM port and the desired speed and click
Update
button.
4.
The module will then reboot into the bootloader and the flashing will start. A command prompt will
start in the background to run the external program
nrfutil
. When the flashing is done, the command
prompt will close by itself.
5.
Repeat the above-mentioned steps 1 to 3 with the file that contains the application.