LILY-W1 series - System integration manual
UBX-15027600 - R09
Regulatory compliance
Page 49 of 64
C1 - Public
LILY-W1 802.11b/g/n operation outside the 2412–2462 MHz band is prohibited in the US and
Canada. Configuration of the module to operate on channels 12–13 must be prevented. The channels
allowed are described in Table 25.
Channel number Channel center frequency
[MHz]
Allowed channels
Remarks
1 – 11
2412 – 2462
Yes
12 – 13
2467 – 2472
No
Table 25: Allowed channel usage under FCC/ISED regulation
5.2.6
End product labeling requirements
For an end-product using the LILY-W1 series, there must be a label containing, at least, the following
information:
This device
contains
FCC ID:
(XYZ)(UPN)
IC: (CN)-(UPN)
(XYZ) represents the FCC "Grantee Code", this code may consist of Arabic numerals, capital letters,
or other characters, the format for this code will be specified by the Commission's Office of
Engineering and Technology
. (CN) is the Company Number registered at IC. (UPN) is the Unique
Product Number decided by the grant owner.
The label must be affixed on an exterior surface of the end product such that it will be visible upon
inspection in compliance with the modular labeling requirements of OET KDB 784748. The host user
manual must also contain clear instructions on how end users can find and/or access the FCC ID of
the end product.
In compliance with the modular labeling requirements of OET KDB 784748, the label on the LILY-W1
series module that displays original FCC ID acquired by u-blox can be replaced with a new one that
displays the FCC/ISED ID of the end-product.
FCC end product labeling
In accordance with 47 CFR § 15.19, the end product shall bear the following statement in a
conspicuous location on the device:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
ISED end product labeling
The end product shall bear the following statement in both English and French in a conspicuous
location on the device:
15
Under IC regulations, operation in the band 5150–5250 MHz is for indoor use only and the end product must be labelled
accordingly.
16
47 CFR 2.926