JODY-W2 - System integration manual
UBX-18068879 - R14
Regulatory compliance
Page 70 of 84
C1 - Public
•
Without permission granted by the NCC, any company, enterprise, or user is not allowed to change
frequency, enhance transmitting power, or alter original characteristic as well as performance to
an approved low power radio-frequency device.
•
The low power radio-frequency devices shall not influence aircraft security and interfere legal
communications; If any interference is found or suspected, the user shall immediately cease
operating the equipment until the interference has been prevented. The said legal communications
means radio communications is operated in compliance with the Telecommunications Act. The low
power radio-frequency devices must be susceptible with the interference from legal
communications or ISM radio wave radiated devices.
shows the NCC certification IDs allocated to JODY-W2 modules.
Model
NCC ID
JODY-W263-01A
CCAJ22Y100F0T0
JODY-W263-00A
CCAJ22Y100F1T2
JODY-W263-00B
CCAJ22Y100F2T1
JODY-W263-10B
CCAJ22Y100F3T3
Table 34: NCC certification IDs for different variants of JODY-W2 modules
Labeling requirements for end products
End products based on JODY-W2 series modules and targeted for distribution in Taiwan must carry
labels with the textual and graphical elements shown below.
Contains Transmitter Module
內含發射器模組
:
:
CCAJ22Y100F0T0
Figure 16: JODY-W263-01A
Contains Transmitter Module
內含發射器模組
:
:
CCAJ22Y100F1T2
Figure 17: JODY-W263-00A
Contains Transmitter Module
內含發射器模組
:
:
CCAJ22Y100F2T1
Figure 18: JODY-W263-00B
Contains Transmitter Module
內含發射器模組
:
:
CCAJ22Y100F3T3
Figure 19: JODY-W263-10B
Other wording can be used, but only if the meaning of original messaging remains unchanged. The
label must be physically attached to the product and made clearly visible for inspection.
