NMEA Manual based on MediaTek chipset - Manual
FTX-HW-13002-A
Preliminary
Page 16 of 39
$PMTKLOX,1,7,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF
,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF,FFFFFFFF*58
...
$PMTKLOX,2*47
$PMTK001,622,3*36
This message applies only for MT333X based receivers IT530, IT530M, UC530 and UC530M.
2.17
PMTK869 ENABLE EASY
Command purpose:
Enable or disable EASY function. Query if EASY is enabled or disabled.
Command number:
869
DataField:
$PMTK869, Cmd Type, [Enable]
CmdType:
Set or query
‘0’ = Query
‘1’ = Set
‘2’ = Result for Query operation
Enable: Enable or Disable
‘0’ = Disable
‘1’ = Enable
Example:
To query if EASY is enabled or disabled, use
$PMTK869,0*29<CR><LF>
If EASY is enabled, the receiver returns
$PMTK869,2,1*36<CR><LF>
If EASY is disabled, the receiver returns
$PMTK869,2,0*37<CR><LF>
To Enable EASY, use
$PMTK869,1,1*35<CR><LF>
To Disable EASY, use
$PMTK869,1,0*36<CR><LF>
This message applies only for MT333X based receivers IT530, IT530M, UC530 and UC530M.
2.18
PMTK220 SET POS FIX
Command purpose:
Set position fix interval.
Command number:
220
DataField:
Interval: Position fix interval [msec]. Must be larger than 200.
Example:
$PMTK220,1000*1F<CR><LF>
Reply:
