EVK-W16 - User Guide
UBX-15017061 - R02
Advance Information
Factory restore
Page 24 of 38
To set the ELIN-W160 in DFU mode:
Then on the PC, run the elin-w16-flashload.sh script:
On completion of the firmware download, the ELIN-W160 will reboot into your newly flashed system.
$ sudo ./elin-w16-flashload.sh all ../elin-w160-evk-v2.0.0.0
dfu-util 0.7
Copyright 2005-2008 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2012 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to [email protected]
...
...
Copying data from PC to DFU device
Starting download: [##################################################] finished!
state(2) = dfuIDLE, status(0) = No error condition is present
Done!
Resetting USB to switch back to runtime mode
U-Boot# dfu nand 0
using id 'nand0,0'
using id 'nand0,1'
using id 'nand0,2'
using id 'nand0,3'
using id 'nand0,4'
using id 'nand0,5'
using id 'nand0,6'
using id 'nand0,7'
using id 'nand0,8'
using id 'nand0,9'
using id 'nand0,10'
GADGET DRIVER: usb_dnl_dfu
musb-hdrc: peripheral reset irq lost!
U-Boot# nand erase.chip
NAND erase.chip: device 0 whole chip
Erasing at 0x1ffe0000 -- 100% complete.
OK
