u-blox EVK-U26, User Manual

Page: 7 / 21

EVK-U26, EVK-U27 - User Guide
UBX-14001743 - R03 Early Production Information Starting up
Page 7 of 21
1.6 EVK-U2x pin-out
DIL B2B connector
Name / Pin Number
SARA-U2
Signal Name
SARA-U2
Pin N°
SARA-U2
Pin N°
SARA-U2
Signal Name
DIL B2B connector
Name / Pin Number
J103 Pins 7-8-9-10 GND 1 64 GND J103 Pins 7-8-9-10
J103 Pin 3 V_BCKP 2 63 GND J103 Pins 7-8-9-10
J103 Pins 7-8-9-10 GND 3 62 ANT_DET J100 Pin 36
J103 Pin 36 V_INT 4 61 GND J103 Pins 7-8-9-10
J103 Pins 7-8-9-10 GND 5 60 GND J103 Pins 7-8-9-10
J103 Pins 18 DSR 6 59 GND J103 Pins 7-8-9-10
J103 Pins 17 RI 7 58 GND J103 Pins 7-8-9-10
J103 Pins 11 DCD 8 57 GND J103 Pins 7-8-9-10
J103 Pin 12 DTR 9 56 ANT Not available
J103 Pin 13 RTS 10 55 GND J103 Pins 7-8-9-10
J103 Pin 14 CTS 11 54 GND J103 Pins 7-8-9-10
J103 Pin 15 TXD 12 53 VCC J100 Pins 7-8-9-10
J103 Pin 16 RXD 13 52 VCC J100 Pins 7-8-9-10
J103 Pins 7-8-9-10 GND 14 51 VCC J100 Pins 7-8-9-10
J103 Pin 29 PWR_ON 15 50 GND J103 Pins 7-8-9-10
J103 Pin 33 GPIO1 16 49 RSVD Not available
Not available VUSB_DET 17 48 RSVD Not available
J100 Pin 26 RESET_N 18 47 RSVD Not available
J103 Pin 24 CODEC_CLK 19 46 RSVD Not available
J103 Pins 7-8-9-10 GND 20 45 RSVD Not available
J103 Pins 7-8-9-10 GND 21 44 RSVD Not available
J103 Pins 7-8-9-10 GND 22 43 GND J103 Pins 7-8-9-10
J103 Pin 31 GPIO2 23 42 SIM_DET J103 Pin 23
J103 Pin 32 GPIO3 24 41 VSIM J100 Pin 13
J103 Pins 25 GPIO4 25 40 SIM_RST J100 Pin 16
J100 Pin 21 SDA 26 39 SIM_IO J100 Pin 14
J100 Pin 20 SCL 27 38 SIM_CLK J100 Pin 15
Not available USB_D- 28 37 I2S_RXD J100 Pin 23
Not available USB_D+ 29 36 I2S_CLK J100 Pin 22
J103 Pins 7-8-9-10 GND 30 35 I2S_TXD J100 Pin 24
Not available RSVD 31 34 I2S_WA J100 Pin 25
J103 Pins 7-8-9-10 GND 32 33 RSVD J100 Pin 30
Table 4: Cellular module interfaces availability on the 42-pin Dual-In-Line Board-to-Board connectors on the adapter board
1.7 Software installation
The USB driver can be downloaded from the Web; see the Quick Start card [5] for the URL. Save the executable
file to any location of the hard drive on the computer. The installation can be started by running the executable
file on the computer running the Windows operating system.