u-blox EVK-NORA-B1 User Manual Download | Manualshive

Page: 5 / 32

background image

EVK-NORA-B1 - User guide

UBX-20030319 - R05

Product description

Page 5 of 32

C1-Public

1.2

Items included in kit

1.2.1

EVK-NORA-B100 kit contents

•

EVK-NORA-B10 evaluation board with NORA-B100 module

•

Micro-USB cable

•

NFC antenna

•

2.4 GHz U.FL antenna kit

•

10-pin SWD programming cable, 2x5 headers on 1.27 mm centers

☞

For evaluation of the NORA-B101 module, select the EVK-NORA-B100 kit. Only the antenna
connection point is different.

1.2.2

EVK-NORA-B106 kit contents

•

EVK-NORA-B10 evaluation board with NORA-B106 module

•

Micro-USB cable

•

NFC antenna

•

2.4 GHz antenna integrated onto NORA-B106 module (no external antenna)

•

10-pin SWD programming cable, 2x5 headers on 1.27 mm centers

1.3

Development tools

The tools shown in Table 1 aid the development of NORA-B1 series Bluetooth modules.

Tool

Description

Nordic Semiconductor
nRF Connect SDK (NCS)

nRF Connect SDK contains several components, including the Zephyr RTOS, MCUboot, and
nrfxlib peripheral libraries for the nRF5340 CPU within the NORA-B1 series modules.
Installation of NCS is managed through nRF Connect for Desktop. Available for 32- and 64-
bit Windows, macOS, and 64-bit Linux platforms.
Nordic Command Line Tools are installed with NCS, including nrfjprog.

☞

nrfjprog is not supported on ARM Linux.

Nordic Semiconductor
nRF Connect for Desktop

nRF Connect for Desktop is the primary development tool used with the NORA-B1 series
modules. This tool includes an installation and maintenance utility for the nRF Connect SDK,
Toolchain Manager.
nRF Connect for Desktop is a cross-platform tool that also enables testing and development
with Bluetooth LE. It allows easy setup of connections with other devices and uses these
connections to read and write the external nodes. Available for Windows, macOS, and Linux.

Nordic Semiconductor
nRF Connect for Mobile

nRF Connect for Mobile is a powerful generic tool that allows you to scan and explore your
Bluetooth LE devices and communicate with them. nRF Connect for Mobile supports several
Bluetooth SIG adopted profiles, as well as the Device Firmware Update profile (DFU) from
Nordic Semiconductor or Eddystone from Google. Available for iOS and Android. Installation
is nRF Connect for Mobile is optional.

SEGGER J-Link Software and
Documentation Pack

J-Link Commander (JLink.exe) is a command line-based utility that can be used for verifying
proper functionality of J-Link as well as for simple analysis of the target system. It supports
some simple commands, such as memory dump, halt, step, and go, to verify the target
connection. Available for Windows, macOS, and Linux platforms.

Nordic Semiconductor
Mobile Apps

Additional, optional mobile utilities for application development. Available for iOS and
Android.

Table 1: Development tools

«
...
3
4
5
6
7
...
»

Summary of Contents for EVK-NORA-B1

































Reviews:

No comments

Related manuals for EVK-NORA-B1

Brand: Panasonic Pages: 35

Brand: Intel Pages: 48

Brand: EPOX Pages: 83

Brand: Quantum Pages: 69

TPS628436-7-8EVM-167

Brand: Texas Instruments Pages: 15

Brand: Vox Pages: 23

Brand: Analog Devices Pages: 128

Brand: BCM Pages: 93

Brand: Gigabyte Pages: 37

Brand: MSI Pages: 85

Brand: Qiyangtech Pages: 16

Brand: Daewoo Pages: 46

Brand: Peak Pages: 33

Brand: AAC Microtec Pages: 106

Brand: MSI Pages: 108

Brand: Biostar Pages: 36

Brand: DFI Pages: 70

Brand: DFI Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands