u-blox EVK-JODY-W3, User Manual

Page: 22 / 30

EVK-JODY-W3 - User guide
UBX-20030840 - R04 Board description Page 22 of 29
Place jumpers J401 and J402 to enable the audio codec, as shown in Figure 16.
Figure 16: Jumpers to enable the audio codec
The I2C interface of the audio codec is provided on connector J303 of the EVB as shown in Table 10
and Figure 20. The PCM/I2S interface of the JODY-W3 module is directly connected to the serial audio
interface of the MAX9860 audio codec. The PCM pins are shared with the I2S interface and are
additionally provided on connector J301 as shown in Table 10 and Figure 19.
Name I/O Connector / pin no. Description
I2C_SDA I/O J303 / 11 I2C Serial-Data Input/Output
I2C_SCL I J303 / 13 I2C Serial-Data clock
PCM_CLK I/O J301 / 16 PCM clock
Alternate function: I2S clock
PCM_SYNC I/O J301 / 15 PCM frame sync
Alternate function: I2S word select
PCM_IN I J301 / 18 PCM data in
Alternate function: I2S data in
PCM_OUT O J301 / 17 PCM data out
Alternate function: I2S data out
Table 10: Audio interfaces
3.9 Antenna interfaces
The evaluation board includes two dual-band 2.4/5 GHz chip antennas (Pulse Electronics W3006) for
Wi-Fi and Bluetooth communication. Three standard 50
Ω
female SMA connectors are included to
connect external antennas or measurement instruments. The antenna interfaces are selected by
connecting U.FL connectors on the EVB module board with designated U.FL connectors on the EVB
carrier board with coaxial RF cables.
The module board has three U.FL connectors which connect to the antenna pins of the JODY-W3
series module. To use any of the chip antennas or SMA connectors on the EVB carrier board,
connect the coaxial RF cables between the U.FL connector on the module board and U.FL
connectors on the carrier board. See also
EVK-JODY-W374 antenna connections and
EVK-JODY-W377 antenna connections.
Figure 11 describes the available radio interfaces of the modules and the default antenna interfaces
that are selected in the EVK-JODY-W3.
Product name Module antenna pin Function Default antenna interface selected
EVK-JODY-W374 ANT0 5GHz Wi-Fi and Bluetooth Dual-band chip antenna ANT400
ANT1 2.4/5 GHz Wi-Fi Dual-band chip antenna ANT401
ANT2 - -
EVK-JODY-W377 ANT0 2.4/5 GHz Wi-Fi SMA connector 2
ANT1 2.4/5 GHz Wi-Fi SMA connector 1
ANT2 Bluetooth Dual-band chip antenna ANT400
Table 11: Antenna interface configuration
J401 J402