C101-D9S - User guide
UBX-20031865 - R01
C101-D9S product overview
Page 5 of 15
C1-Public
2
C101-D9S product overview
2.1
Components
C101-D9S houses the NEO-D9S L-band correction data receiver. The board is powered from the USB
cable connection or via Arduino shield. The main components of the board are listed below and shown
in Figure 1 and Figure 2:
•
Native USB port
•
FTDI USB bridge
•
SMA RF connector and antenna supply capability (L-band)
•
UART2 interface through Arduino shield
•
NEO-D9S RESET button
•
NEO-D9S SAFEBOOT button
Figure 1: C101-D9S block diagram
