11. Screw B. (2 PCS)
12. White iron tube
13. Base cover
14. Screw A. (4 PCS)
15. Bar base
16. End cap
17. Nut
18. Spinner
19. Clip
ASSEMBLE
1. Put the end cap at the end of the bar
base
2. Fasten the white iron tupe on the cross
bar base with screw a (4pc) of
3. Slide the base cover onto the bottom
along the white iron tube.
4. Put the pole holder on the extension pole
at the middle position. Then fix it on the
top of the white iron tube by tighten screw
b (2pc)
5. Put the pole locker on the pole holder.
6. Place the motor and switch box firmly on
the top of the extension pole and tighten
screw c.
7. To finish assemble the guard and blade
on the front part of the motor.
8. To change the direction and height, loose
the pole locker and move the fan into a
suitable position, then tighten the pole
locker againg.
CLEANING & MAINTENANCE
1. Use a soft tissue or cloth to clean the fan
body. In case of dirt or grime does not
come off easily, use soappy water. Do not
use benzine, thinner or other solve nts
2. Use a vacuum cleaner to clean the fan in
case of dirt and grime does not come of
easily,use a brush.
3. Reading carefully the instruction before
using.
4. Be used indoor or dry places.
5. Cut off the power when not use or before
repairing.
6. If there is something wring with the
equipment,do not use it any more and
send for technician for repairing.
7. If the external flexible cable of this
appliances is damaged. It shall be
replaced by a special cord or assemblely
available from the manufacturer or his
service agent.
8. Appliance shall be used with rated voltage
and frequency
9. Don’t disconnect the appliance with wet
hands and without to force the supply
cord.
10. Don't remove the appliance with the aid of
supply cord
11. Use the appliance only in the described
manner.
12. A periodically maintenance(description
see in the manual) the appliance is
necessary.
STORAGE.
It is recommended to store in a covered
and dry place at an ambient temperature
not higher than + 40°C with relative
humidity above 70% and the absence in the
environment of dust, acid and other vapours.
TRANSPORTATION.
To the device special transportation rules are
not applied. When transporting the unit, use
the original packaging. During transportation,
avoid drops, impacts and other mechanical
3
ENGLISH
2
ENGLISH
INSTRUCTION MANUAL
Thank you for purchasing this high quality
Fan. Our fans have been carefully designed
and constructed to meet the highest
standards of performance, quality and safety.
Please read the instructions carefully to
ensure satisfactory and trouble free use.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic
safety precautions should always be
followed, including the following:
• Read all instructions carefully and save
these instruction manual for reference.
• To protect against electric shock, do not
immerse cord, plug or fan into water or
any other liquid.
• Do not use appliance for other than
intended use.
• Use the appliance only on the
voltage specified on its rating plate
(220-240V/50Hz).
• Unplug from outlet when not in use and
before cleaning.
• Do not pull the connection cord over
sharp edges and never jam it.
• Do not pull the plug out of the socket by
pulling the connection cord.
• Do not use outdoors.
• Do not use an extension cord, unless
the cord has been checked and tested
by your electrical authority or a qualified
technician.
• Close supervision is necessary when any
appliance is used by or near children.
• Always use your appliance on a suitabel
level and dry platform.
• Avoid using an appliance where it can fall
or be pushed into water. Never reach for
an appliance after it has fallen into water.
Switch off at the mains power point und
unplug immediately.
• Never attempt to insert any object through
the grille when the fan is operating.
• Always disconnect fan when moving from
one location to another.
• Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions, or has been
damaged in any manner.
• Do not cover the grille.
• Do not spray pesticide towards. It may
make the resin and coating bad or
broken.
• Do not use the fan in such place where
the curtain may be drawn in.
• Do not use before assembly.
• Do not use in the high temperature
(above 40°C), high humidity (bathroom)
and dusty places or the places where
there is acid alkali oil, etc.
• The babies, patients and old men should
not be blown directly for a long time.
• If the fan is to be stored for an extended
period of time or not used regularly,
replace it in the original packaging (or
similar) and store it in a dry and clean
place. Before using again, check if the
unit is clean and dry and if the fan blades
rotates freely.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• Do not operate any appliance with
a damaged cord or plug or after the
appliance malfunctions, or is dropped
or damaged in any manner. Return
appliance to the nearest authorized
service facility for examination, repair or
electrical or mechanical adjustment.
• If the supply cord is damaged it must
be replaced by the manufacturer or a
authorized service agent or a qualified
technician in order to avoid a hazard.
Repairs:
Danger: Electrical appliances must only be
repaired by authorized specialists. Because
damages can occur by nonauthorized
repairs. In the case of a repair, contact your
retailer or contact the producer.
DESCRIPTION OF PARTS
1. Front guard
2. Blade
3. Rear guard
4. Moter
5. Shaft
6. Switch box
7. Screw C
8. Pole locker
9. Pole holder
10. Extension pole
