Easy Travel
– Service Manual
Rev. 0401
10
3.4
Solo Controller ET1B
Kit Number E0-00-1-032
Kit Number E0-00-1-704
(for serial # start-
ing with 11B)
Tools:
Short Phillips #2 Screwdriver
Pliers
1. Remove Controller Cover, see instruc-
tion 3.3
2. Detach wiring from Controller (9-A)
3. Remove Controller (9-A) by unscrewing
Screws (9-B)
4. Secure new Controller to Column Frame
5. Attach Wires to Controller (Fig. 9a): from
Battery Contacts Assembly, the red wire
(A) to “B+” tab (B), the black (C) to “B-“
tab (D); from Interface Circuit Board in-
sert 11-pin connector into top socket P2
(E); the two white wires (F) to the white
capped cables (G) from Power Cable;
from Power Cable the #1 wire to “M+”
tab (H), the #2 to “M-“ tab (J)
6. Secure Controller Cover to Column
Frame
7. Check drive, brake and freewheel op-
eration
Figure 9a
Figure 9
Summary of Contents for Easy Travel Elite
Page 1: ...Service Manual...
