7
removing the saucers and the blade holder. Figure B (40 degrees).
Figure B
8. Tighten Allen screws of saucers securely and recheck after a few working
hours.
9. The PTO drive shaft may have to be shortened to fit your particular tractor.
The shaft should be shortened a minimum amount only. A freewheeling
clutch must be fitted PTO shaft if the tractor does not have an internal
freewheeling clutch. Always use stabilizers or sway bars when attaching
the machine to the tractor to prevent side movement of the machine. To
put the mower into mowing position after transport, the transport tube is
placed in the upper position and the safety break away is fitted to the
upper pin of the hitch frame. Depending on the length of the top link, either
the front or the near holes in the hitch frames can be used. If the machine
leans too far forward when lifting in working position, use lower top link
pinhole.
