Getting familiar
LED indicator light
The indicator light turns red
when transmit, turns green
when receive.
It blinks red when the battery
capacity is low, and blinks green
when scanning.
Microphone
sound input
Antenna
connect the supplied antenna here.
13
Long press this key can lock
or unlock the keypad under
standby mode.
Lock
Using to adjusting the
channel and frequency
Channel Knob
Power/Volume Knob
this control toggle the transceiver's
power on/off and adjust the volume
level.
Speaker
the internal speaker
is located here.
this key can be used to
shift the band A/B, and
exited the Function Menu.
U/V
Short press this key under standby
mode can shift the VFO Mode and
MR mode, long press this key can
exchange of RX frequency and TX
frequency
#T-R
14
Mic/speaker jack/
programming port
Belt clip
You can clip the radio in the
belt and is easy to take.
Used to connect headset or
external programming cable.
Programmable via PC
programming software.
Li-ion battery
For charging the radio.
press it to transmit and
release it to receive after
your transmission is completed.
PTT
Press and hold this key
disables the noise squelching
action ,allowing you to hear
very weak signals near the
back-ground noise level.
MONI
