TYT MD-750, User Manual

Page: 7 / 16

6
Delete all Yes: clear dialed call list, No: Do not
delete
mode
Answered
Answered List…
Received private call,press OK to view/add
contact/delete, add to contact to enter
alias to store in contact list
Delete all
Yes: clear received call list, No: Do not
delete
Missed
Missed List…
Missed private call,press OK to view/add
contact/delete, add to contact to enter
alias to store in contact list
Delete all
Yes: clear missed call list, No: Do not
delete
Set Radio Set
CTCSS/DCS
C CTC/DCS
Change the encoding and decoding of CTC/DCS.
Press OK to enter, Press the * key to select
OFF / DCS, and press the up and down keys to
choose CTCSS in the OFF interface.. In DCS
mode, press “#” key to switch between
normal phase (N) and reverse phase (I). You
can also manually input non-standard CTCSS
/ DCS by keyboard, press OK key to confirm,
press BACK key to return
Only
support
analog
mode
R CTC/DCS
Change the decoding of CTCSS / DCS. Setting
method is the same as above
T CTC/DCS
Change the encoding of CTCSS / DCS. Setting
method is the same as above
Squelch Level 0-9 Level 0-9
TX Power
Low Transmit on about 5W
High Transmit on about 1W
Talkaround
On
ON.This function will only work if the
current channel of programming software is
“Allow Talkaround”.
关 Off Off
Band
Narrow work on narrow band Only
support
analog
mode
Wide work on wide band
Busy lock
Off
Can also transmit even the channel is
occupied
Carry
forbidden to transmit after press PTT when
there is carrier
QT/CC
forbidden to transmit when Match CTCSS/DCS
/ color code
TOT
OFF Off, no transmit restrictions