Tysso MP-1311, User Manual

Page: 4 / 22

Copyright © 2019 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks used herein are
the property of their respective owners.
3
Important Safety Information

Read following instructions carefully.

Use only parts, especially power adapter, recommended by the manufacturer;
unapproved parts may be hazardous.

Before plugging the power cord into the AC inlet of the power supply unit, make sure
that the voltage applied to the power outlet is within the specified range (100V~240V).

Improper power source voltage range will cause damage to the power supply unit.

Power off the system and remove the power adapter while cleaning the system.

Before powering on the system, make sure all the peripherals are firmly installed.

Do not use the system near water, such as a bathtub, a washbowl, a kitchen sink, a
laundry tub, and a swimming pool. Do not expose the machine under direct sunlight, and
keep it away from any heat source.

Do not place the system on an unstable cart, stand or table. If the machine falls, it may
injure a person or cause serious damage to the appliance.

The system is equipped with a three-wire grounded plug with a third (grounding) pin.
This is a safety feature. If your outlet does not accommodate the three-wire plug, have an
electrician install a correct outlet, or use an adapter to ground the appliance safely. Do
not leave out the safety purpose of the grounded plug.

Do not allow anything to rest on the power cord. Do not locate the system where people
may walk on the cord.

Do not make the power outlet and extension cords overload. Overload can result in fire
or electric shock.

Do not push any object into the computer cabinet. Dangerous voltage points may be
touched and the parts may be shorted out resulting in fire or electric shock.

Do not attempt to service the system on your own. Opening or removing cover can
expose you to dangerous voltage or other hazards.

Power off the system before installing or removing non-PNP (plug and play) devices.

If any of the following situations occurs, unplug the systems from the power outlet
immediately and consult with a qualified service person:
1. The power cord or plug is damaged or frayed.
2. Liquid is spilled into the system.
3. The system is dropped or the cabinet is damaged.

When the system is not in use, cover the system and store it with care.