Tysso BCP-5500 Series, User Manual

Page: 11 / 60

-9-
3 Getting Started
3.1 Charging the Battery
It’s recommended to have the battery fully charged before use.
User can charge the battery via the supplied USB Cable
or via the RS-232 cable with optional external power adapter.
3.1.1 Charge the battery via USB Interface of Computer
To Host PC
Charge the battery via USB Interface on the computer
1. Turn on the computer.
2. Connect the USB connector to the USB port on the computer.
3. Install the data collector to the recharge and communication cradle.
The data collector is activated and the battery is recharging
automatically (There is a beep sound and the LED indicator lit RED
steadily).
4. As the battery is fully charged, the LED indicator lit GREEN to indicate
the battery charge is completed.
5. Remove the data collector from the cradle.
The data collector is ready to use.
3.1.2 Charge the battery via RS-232 Cable and USB Power