13
4.
Transport
4.1
Preparation for transport
•
Remove the power cord from the saw.
•
Empty the water from the pan.
•
Saw blade height adjustment (item 7) is tightened.
•
Put the saw table on the back wall and lock the device (item 10)
4.2
Displace with the crane
•
Caution! The locking of the saw arm (Pos. 16) must stand vertical. Hang up the stopper
means with enough carry power to the limit stops (item 12)
•
By displacing - keep the saw in your eyes
4.3
Transport with the truck
•
arrest the wheels with the brake
•
fix the saws on the limit stop (item 12)
4.4
Transport with the forklift
•
Take up the saw with the forklift (item 14)
5.
Operation
5.1
Setting up the saw
•
Set up the saw on a clean and stable foundation.
•
All three wheels must have a grounding contact
•
Press the brake (ltem 16)
5.2
Saw preparations (see 3.4)
5.3
Test the direction of rotation of the saw blade
5.4 Changing direction of rotation (see 3.6)
5.5
Sawing (see 3.7)
5.6
Saw blade sharpness
lf the saw blade loses its sharpness after longer use, you can "sharpen" it by making some cuts in
sand-lime bricks or similar material.
5.7
Cooling water
Very dirty water reduces the life of the pump and saw blade.
•
With frequent use, replace the water daily and remove the saw sludge.
•
Also clean the pump's suction strainer with each water change.
