background image

TYROLIT

 

Hydrostress AG

Page 5

Ring saw HRH500 



Operator (user)

As a user TYROLIT Hydrostress designates a person who independently performs the following 

work:

•  Setting up of machines and systems from TYROLIT Hydrostress within the scope of intended 

application

•  Independent execution and supervision of work

•  Location of faults and instigation of fault rectification or independent fault rectification

•  Maintenance

•  Verify the correct functioning of the safety devices

Personnel qualifications

•  Completed training as a concrete cutting specialist or relevant occupational experience

•  Introduction (basic training) in the operation of the appliance by a service technician

Service technician

As a service technician TYROLIT Hydrostress designates a person who independently performs 

the following work:

•  Installation of machines and systems from TYROLIT Hydrostress

•  Makes adjustments to machines and systems for which special access rights are required

•  Complex service and maintenance work

Personnel qualifications

•  Specialist professional training (mechanical / electro technical)

•  Product specific training from TYROLIT Hydrostress

Organisational measures

Product monitoring obligation

The appliance must only be operated in a defect free and undamaged condition. Operating 

personnel must notify immediately changes in operational behaviour or safety-related compo-

nents to a responsible person or the manufacturer. 

The maintenance intervals must be adhered to. Faults affecting safety must be rectified imme-

diately.

Location of these instructions

A copy of the instructions must be available to staff at all times at the location where the appa-

ratus is used.

Workplace

 

X

Create sufficient free space to enable safe working.

 

X

Provide sufficient workplace illumination.

 

X

Cordon off danger area visibly so that during sawing operations no person can enter the 

danger area.

2.3.4

2.3.5

2.4

2.4.1

2.4.2

2.4.3

Summary of Contents for HRH500 Series



























Reviews: