TYROLIT
Hydrostress AG
Page 24
Ring saw HRG500
7.
Clean filter elements.
Cleaning the nylon filter, the nylon sieve and the filter hood of the pre-filter:
Clean with a paintbrush or other soft brush, or gently blow out from the inside with com-
pressed air. Wash out heavily soiled nylon filter in lukewarm soapy water using normal wash-
ing-up liquid. In the event of heavy soiling, clean (several time per day), since the full power of
the motor can only be attained with a clean air filter. Dry air filter properly. Re-assemble top and
bottom part.
Replace damaged air filter immediately! Broken-off pieces of fabric and large dirt particles
can destroy the motor.
8.
Installing the filter and the filter hood.
Before installing the air filter, check the choke flap for any dirt particles that may have fallen in.
Remove if necessary. Insert air filter and push down air filter retaining bracket until it engages.
Push in the choke and depress gas lever once to deactivate the semi-throttle position. Attach
filter hood and secure with locking clips.
