TYROLIT Hydrostress AG
7
Maintenance
When? What?
Daily
►
Perform a visual check for damage.
Weekly
►
Check belt and chain tension and adjust as
necessary.
Every 50 hours of operation
►
Lubricate grease nipples.
Annually or every 100 operating hours
►
Arrange a major service by TYROLIT
Hydrostress AG or an authorised
representative.
7.1
Grease nipples
Position of grease nipples
1
Motor: 2 items
2
Feed adjuster control rods: 4 items
3
Wheel drive shaft bearing: 2 items
4
Cylinder eye: 1 item
5
Blade drive shaft bearing: 2 items
7.2
Tensioning belt on travel drive
►
Remove the appropriate number of belt links until the belt is tensioned.
Page 18
Floor Saw FSE1240
