TYROLIT
Hydrostress AG
Page 15
DME22SU
Operation
DANGER
•
Never work without suitable safety equipment.
•
Always wear hearing protection.
•
Remove adjusting and installation tools before switching the electrical tool on.
•
Never work on ladders.
•
Keep children away from the electrical tool and the working area.
•
Avoid abnormal postures.
•
Ensure that you have firm footing, and keep your balance at all times.
•
Avoid body contact with earthed surfaces such as pipes, heaters, ovens and refrigerators.
There is an increased risk of electric shock if your body is earthed.
Settings
Gears
Position the selector switch in accordance with the required drilling diameter. Never use force
to move the switch, and only move it if the electrical device is slowing down or stopped.
Water supply
Ensure that water supply is provided.
Start / switch on electrical tool
9
The electrical tool is correctly fitted to the drilling stand.
9
The cutting tool is firmly screwed to the electrical tool.
9
The electrical tool is correctly attached to the power supply.
9
The power supply is monitored by the PRCD residual current circuit breaker.
9
The water supply is attached, and the cutting tool is being supplied with water.
X
Start motor using the On/Off switch.
Start the electric tool
6.
6.1
6.1.1
6.1.2
6.2
