typical TC2210GB, Instruction Book

Page: 33 / 74

5.2.2 Procedure for programming with icons
The procedure for programming with icons is as follows.
1
）Displaying the programming screen
2）Starting program creation
3）Positioning the machine needle point at the first stitch of pattern sheet
USE
to move work clamp, and Press when the needle point is at
The first stitch is programmed and the following screen appears.
4）Creating program
Select an icon depending on your goal on the screen displayed in step 3
to create program for the pattern you want.
The program is available until deletion. For details about program
creations, refer to
"Programming example"/"Programming"
On the launcher screen, select and press
If the programming screen does not appear, hold down
The work clamp moves to the home position and the programming screen is displayed.
Select ，and press
the first stitch of the pattern sheet.
26