CHARGING THE BATTERIES
You can charge the LiPo battery in the TYPHOON Wizard™
by using supplied USB cable and inserting it into the USB
port on your computer. Make sure the TYPHOON Wizard™
is OFF and connect cable into open USB port on your
computer. The Power LED will show solid RED while battery
is charging, when charging is completed the red LED light
will turn off. It will take approximately 2 hours to charge a
fully discharged battery. A fully charged battery will give an
operating time of 3.5 hours per charge.
POWERING ON/OFF:
Press and hold the Power Button . When all LEDs blink
once and the TYPHOON Wizard™ vibrates once, release the
Power button . The Power LED glows solid green, and the
Aircraft Mode LED is on, then the TYPHOON Wizard™ is
powered on successfully.
NOTICE: IMU Mal-function: If the TYPHOON Wizard™ keeps
vibrating when powering on and fails to power on, please
return it to the service center for maintenance.
WARNING: Do not take out the LiPo battery installed in the
TYPHOON Wizard™, otherwise the TYPHOON Wizard™
may be damaged.
