BINDING TYPHOON WIZARD™ TO TYPHOON H
STEP 1) Switch on the ST16 Ground Station first, and then
power on Typhoon H. Do not touch it until the initialization
completes. Wait a few seconds for the camera to align and
connected.
STEP 2) Tap the settings icon [ ] on the ST16 and then
switch from single mode to team mode.
STEP 3) When the Typhoon H Main LED Status Indicator
starts to blink orange, the aircraft enters binding mode.
STEP 4) Press and hold the Power Button of the Wizard until
the Aircraft Mode LED glows solid blue. Do not release the
Power Button until hearing two beeps from the aircraft, then
release it.
NOTICE: When Typhoon
H is in team mode
(Wizard and ST16), the
Wizard must be bound to
the aircraft and the ST16
Ground Station must be
bound to the camera.
IF YOU NEED TO SWITCH BACK TO SINGLE MODE, THE
OPERATION STEPS ARE AS FOLLOWS:
STEP 1: Tap the settings icon [ ] on the ST16 and then
switch from team mode to single mode.
STEP 2: When the Typhoon H Main LED Status Indicator
starts to blink orange, the aircraft enters binding mode.
STEP 3: Wait for a few seconds, as the remote control will
automatically bind to the camera and aircraft. You will hear
two beeps from the aircraft when the binding is successful.
