10
OPERATING INSTRUCTIONS CONT.:
AUTOMATIC CHARGING
1. Clean the battery terminals if necessary, always wear safety glasses to
protect your eyes.
2. Verify the voltage and type of battery.
3. Connect the
RED
Clamp / ring terminal to the POSITIVE (+) post of the
battery terminal. The POSITIVE battery post will be marked with a PLUS
(+) sign. There may also be a
RED
plastic protective cover over the
positive battery post.
Connect the
BLACK
Clamp / ring terminal to the NEGATIVE (-) post of
the battery terminal. The NEGATIVE battery post will be marked with a
MINUS (-) sign. There may be a
BLACK
plastic protective cover over the
negative battery post.
NOTE:
When charging a battery that is mounted on a vehicle, the cables
should be attached in the following order:
- Connect the
RED
lead to the POSITIVE (+) terminal of the
battery.
- Connect the
BLACK
lead to a metal part of the vehicle
chassis. Choose a spot on the chassis that is some distance
away from the battery itself and any fuel lines.
4. Connect the AC power plug of battery
charger into a wall socket. Battery voltage is
auto-detected and charging will be started
automatically. To manually select voltage,
press and hold for 3 seconds.
NOTE:
If a 12V battery with voltage about
3.5-7.6V is connected, the charger will start in 6V Charging
Mode. Press and hold for 3 seconds to change to 12V
Charging Mode.