Issue
Cause
Remedy
Cannot jump start
Wrong clamp
connection
Make sure to clamp the RED jumper
cable to the POSITIVE (+) post on
the car battery. And BLACK jumper
cable to NEGATIVE (-) post or car
interior. Refer to Page 8 for details.
90-Second timer
to jump start has
expired.
PROJUMP timed out. Disconnect the
cables from the vehicle battery and
reconnect.
Low battery status
Recharge the unit via USB cable until
at least 50% charge.
LED light on the
clamp box keeps
flashing
Protection circuit
is working
Refer to the status table on the
indicator box or page 11 of the
manual.
Flashlight or
lantern does not
turn on
Low battery
Recharge the unit by bundled 120V
AC/DC adapter or via USB cable.
The unit is
charging
As a safety precaution, the
flashlight or lantern will not work
while the unit is charging. Please
unplug the unit from charging or
wait until the unit finishes charging
before using the light.
TROUBLESHOOTING:
A Horizon Brands Company
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626
Mon - Fri, 8AM - 5PM (Pacific Time)
Tel: 1-866-294-9244 (English only) | [email protected]
©2021 TYPE S. All rights reserved.
www.typesauto.com
Made in China
ML-530017_V1
