TYM T254NC, Operator'S Manual

Page: 45 / 92

PTO
REAR PTO
The tractor has one speed PTO (540rpm).
Use the PTO lever to engage.
The PTO switch must be OFF before the PTO is engaged.
1. Decrease the engine speed to near idle.
2. Make sure that the PTO switch is OFF.
3. Engage the rear PTO using the PTO lever.
4. Turn on the PTO switch.
5. Increase the engine speed to a desired speed.
Both the rear and mid PTO are provided for variable utility.
They can be engaged simultaneously or independently at same time.
The engine will not start if the PTO switch is in ON position.
The engine will shut off if the operator leaves the seat with parking brake released and the PTO engaged.
To avoid damage of transmission and implement, do not engage the PTO with the engine
running at high speed.
Caution
44
Engine RPM REAR PTO speed
2893 540RPM
3000 560RPM
Mid
Mid + Rear Rear