TYM T254NC, Operator'S Manual

Page: 20 / 92

HANDLE FUEL SAFELY-AVOID FIRES
Handle fuel with care; it is highly flammable. Do not refuel the
tractor while smoking or near open flame or sparks.
Always stop the engine before refueling the tractor.
Always keep your tractor clean of accumulated grease, and debris.
Always clean up spilled fuel.
STAY CLEAR OF ROTATING SHAFTS
Entanglement in rotating shaft can cause serious injury or death.
Keep the PTO shield in place at all times.
Wear close fitting clothing. Stop the engine and make sure that
the PTO drive is stopped before making adjustments, connections,
or cleaning out PTO driven equipment .
ALWAYS USE SAFETY LIGHTS AND DEVICES
The use of hazard warning lights and turn signals is recommended
when towing equipment on public roads unless prohibited by state or
local regulations.
Use the slow moving vehicle (SMV) signs when driving on public
roads during both day & night time, unless prohibited by law.
PRACTICE SAFE MAINTENANCE
Understand the service procedure before doing work.
Keep the surrounding area of the tractor clean and dry.
Do not attempt to service the tractor when it is in motion.
Keep body parts and clothing away from rotating shafts.
Always lower equipment to the ground. Stop the engine.
Remove the key. Allow the tractor to cool before any repair work
is to be performed.
Securely support any tractor elements that must be raised for
service work.
Keep all parts in good condition and properly installed.
Replace worn or broken parts. Replace damage/missing decals.
Remove any buildup of grease or oil from the tractor.
Disconnect the battery ground cable(
−
) before making adjustments on
electrical systems or welding on the tractor
19