13
PROBLEM
POSSIBLE CAUSE
SOLUTION
The Beverage
cooler does not
run.
The Beverage cooler may not be
plugged in, or plug may be loose.
Ensure the Beverage cooler has been
plugged in properly.
The Beverage cooler is turned off. Press to turn on the cooler.
House fuse blown or tripped
circuit breaker.
Check/replace fuse. Reset circuit
breaker.
The Beverage
cooler is not
cold enough.
External environment may require
a higher setting.
Set a colder setting. Allow several
hours for the temperature to stabilize.
The Beverage cooler has recently
been disconnected for a period of
time.
It takes 3-4 hours for the Beverage
cooler to cool down completely.
Prolonged or frequent door
openings.
Open the door less often.
The door is not closed
completely.
Close the door properly.
The door gasket does not seal
properly.
Check the door gasket. Clean or
change gasket if necessary.
The
compressor
turns on and
off frequently.
The room temperature is hotter
than normal.
It
’
s normal for the Beverage cooler to
work harder under these conditions.
A large amount of contents has
been added to the cooler.
A large amount of contents cause the
Beverage cooler to run more until the
desired temperature is reached.
Prolonged or frequent door
openings.
Open the door less often.
The temperature has not been set
correctly.
Press either
or
to check
the set temperature, and set the
temperature properly.
The door is not closed
completely.
Close the door properly.
The door gasket does not seal
properly.
Check the door gasket. Clean or
change gasket if necessary.
Summary of Contents for TYBC100
Page 15: ...15...
