Floor panel (
Box
1):
Put the floor panel on a level surface 8-16 cm from the wall panel and no more than
152 cm away from a 230V socket.
Position the floor panel in such a way that the slot for the glass sections are at the front of the sauna.
Note: Put the ceiling, bench valance and bench aside until the corresponding steps.
Left back wall panel and right back wall panel (
Box
2):
•
Place the left wall panel section into the back left hand slot of the floor panel.
•
The back left rear panel section must be held in position while the right rear panel
section is located.
•
Place the right wall panel section into the back right hand slot of the floor panel.
•
Connect the right back panel section to the left back panel section.
o
Lift the right back panel and push it onto the wall bracket.
•
Connect the power connections to the B-1 junction box.
•
Fix the cover of the B-1 junction box with 2 Phillips screws.
•
Connect the power connections to the B-2 junction box.
•
Fix the cover of the B-2 junction box with 2 Phillips screws.
Note – Put the benches aside until the Bench fitting section.
Page 4
