background image

Precautions to be taken before commissioning Warning (space configuration and use):

 

  Correct electrical earthing is required 

  Electrical sockets are not permitted in the sauna. 

  Do not allow heating elements to come into contact with water. 

  Do not fit a lock or bolt on the door. 

  Do not block the ventilation holes. 

  Children must always be supervised in the sauna. 

  Clean the sauna with a damp cloth. 

  Cleaning the sauna with steam cleaners, high pressure cleaners or spraying with water is not permitted. 

Warning notice: Do not insert the sauna power cable into a socket before assembly is complete. 
Warning (health restrictions): 

  Being exposed to high temperatures for a long time may lead to hyperthermia (body temperature is several 

degrees above 37° Celsius) 

  Hyperthermia symptoms include: dizziness, lethargy, grogginess and feeling faint. Effects of hyperthermia:  

o

  Failure to realise that you have to leave the infrared sauna.  

o

  Damage to the foetus in pregnant women. 

o

  Being physically unable to leave the sauna. 

o

  Loss of consciousness  

  Warning – the consumption of alcohol or drugs increases the risk of fatal hyperthermia. 

  If you have health problems or are ill, consult your doctor before using the sauna.  

  Stop using it immediately if you feel restless, if you start shaking, if you have a headache or feel sick 

or nauseous. 

  People who suffer from hyperthermia or cardiovascular diseases should seek medical advice before 

using the infrared sauna. 

  Do not use a sauna if you have drunk alcohol or taken tranquillisers or if you suffer from pain in the heat. 

  Using the infrared sauna is not advisable if you have been exposed to UV radiation (a solarium or been 

sunbathing) in the last 24 hours. 

  Should you notice unusual skin changes after using the infrared sauna e.g. persistent erythema (reddening 

of the skin for more than one day) or a reticular change in colour, you should stop using it and seek medical 

advice. 

Warning (fire risk): 

  Do not use the sauna to dry clothing, bathing costumes etc. 

  Do not hang towels or other objects on or in front of the infrared heat radiator. 

  Never operate the infrared sauna with a damaged cable or a damaged socket. 

Pre-assembly information: 

a. Two (2) adults are required for assembling and installing the sauna. 

b. Assembly tools: Phillips screwdriver 

c.

 The

 

boxes are labelled in order of assembly.

 

d. Note: The glass for assembling the front sauna panel is heavy and fragile. 

Box 

1:  

Floor, ceiling

long bench valance, short bench valance, fan component, manual, 

Pack of 10 Phillips screws for the junction box covers 

Box 2:  

Left and right wall panels 

Long and short bench 

Box 

3:  

Left front, right front and front wall panel  

Electrical requirements: 

The infrared sauna must have a 230 volt connection. 

 

 

Page 2 

 

Summary of Contents for Prime+ 1515/C















Reviews: