Tylo Prime+ 1210, User Manual

Page: 6 / 61

Bench valance (
Box
1):
• Insert the bench valance between the left and right wall panel sections.
• Connect the S-3 electrical supply to the S-3 junction box.
• Fix the cover of the S-3 junction box with 2 Phillips screws.
Slide the fan component (
Box 1
) into
the support on the bench valance.
Connect the white connection on the black
junction box to the white connection on the fan.
Black main junction box: (2) connections
Locate the black main junction box that is fixed to the internal floor of the sauna.
1 Insert the 24 pin, multicoloured cable plug into the left hand side of the main junction box.
See point 3 -
Input/output
2 The ON/ OFF switch is on the right hand side of the main junction box.
Set the switch as shown above to the ON ( EIN ) position.
3 Connect the loudspeaker input and output.
Note – Do NOT insert the 230 volt alternating current cable into the socket yet.
Page 6