4/7
Customer Support: www.TygerAuto.com/Contact
Select Driver/Left Mounting Bracket. Slide the Bracket onto the
(4) factory studs on the mounting plate at the end of the frame.
Attach the Mounting Bracket with (4) factory hex nuts and (4)
8mm x 28mm x 3mm Large Flat Washers, (Figs 8 & 9). DO NOT
tighten hardware at this time.
STEP 7
Next, select the Driver/Left Support Bracket. Attach the Support
Bracket to the bottom of the Mounting Bracket with (2) 10mm
Hex Bolts, (4) 10mm Flat Washers, (2) 10mm Lock Washers and
(2) 10mm Hex Nuts, (Figs 10 & 11). Leave hardware loose at this
time. Reuse the factory tow hook hardware to attach the tow
hook to the bottom of the Support Bracket and frame.
STEP 8
(4) 8mm x 28mm
Large Flat Washers
(Fig 8) Attach the Driver/Left Mounting
Bracket. (Reuse the factory hex nuts)
(Fig 9) Driver/Left Mounting Bracket attached
(Fig 11) Reuse tow hook bolts to attach
Support Bracket and tow hook to bottom
of frame (pictured without tow hook, optional)
(Fig 10) Attach Driver/Left Support Bracket
to the Mounting Bracket and frame
Front
Front
(2) 10mm Hex Bolts
(4) 10mm Flat Washers
(2) 10mm Lock Washers
(2) 10mm Hex Nuts
Reuse factory tow hook
bolts for the bottom of
the support bracket
Reuse factory tow hook
bolts for the bottom of
the support bracket
