H o w to Install the Unit
H o w to Install the Unit
How
to
Inst
all
the
Un
i
t
How
to
Ins
ta
ll
the
Uni
t
H
ow to Install the Unit
Determine whether you will connect the unit directly to the cold water supply line
(under sink) or to the faucet (see image).
Option A
l
Faucet:
A faucet connection requires a faucet diverter (included).
Option B
l
Under-Sink:
An under sink connection requires an under-sink adapter kit
(not included) or a compatible t-valve (available from most hardware stores). For more
information see Welcome Guide or call support.
Option A
– Faucet Installation
Many faucets vary in design, and your faucet may require different setup instruc-
tions than those featured in this manual. Please consult a qualified service profes-
sional if you are unable to correctly complete the installation.
①
Shut off both the hot and cold water main supply at the pipe under the sink.
②
If your faucet features a screw-on style aerator, remove it by unscrewing it from the
tip of the faucet.
③
If the included faucet diverter does not fit directly to the tip of the faucet, select an
appropriate size connector and rubber washer(included).
④
When connecting the diverter or adapter to the faucet, be sure to use plumbing pipe
thread seal tape (not included) to preventleaks.
⑤
If necessary, connect the faucet diverter with the appropriate connector tothe faucet.
⑥
Be sure all connections are secure but do not overtighten them.
①
Purchase either an under-sink installation kit (not included) or purchase a T-
connection (with shut-off valve) from a hardware or plumbing supply store.
②
Shutoff both the hot and cold water main supply at the pipe under the sink.
③
Locate the cold water supplyline valve.
④
Disconnectthe faucetcold water supplyline from main cold water pipe. Use a
towel to catch the small amount of water that may come from the faucet supply
line.
⑤
When connecting the T-connection to cold water pipe, be sure to use plumbing
pipe thread seal tape (not included) toprevent leaks.
⑥
Reconnect the faucet cold water supply line to the T-connection (now secured to
the main cold water pipe).
⑦
Be sure all connections are secure but do not overtighten them.
Option B
– Under-Sink Installation
Both Options
Do not turn on the main water supply until all hoses are properly installed to the
unit. The unit and components are subject to change without prior notification in
order to enhance performance.
16
17
