Tycoon TS2MVI32-09, Service Manual

Page: 49 / 87

Maintenance and
Disassembly

Page
4
5 „
3. Electrical parts
Note: Remove the panel plate and fan assembly (refer to 1. Panel plate and 2. Fan assembly) before
disassembling electrical parts.
TS2MVO32-09, TS2MVO32-12
Procedure Illustration
1) Remove the connector for the
compressor (see CJ_ODU_INV_010).
2) Pull out the two blue wires connected
with the four way valve (
CJ_ODU_
INV_010).
3) Pull out connectors of the condenser
coil temp. sensor(T3),outdoor ambient
temp. sensor(T4) and discharge temp.
sensor(TP) (
CJ_ODU_INV_010).
4) Disconnect the electronic expansion
valve wire ( CJ_ODU_INV_010).
5) Then remove the electronic control
box (see
CJ_ODU_INV_010).
CJ_ODU_INV_010
Compressor
T3, T4, TP
Electronic Expansion Valve
4-Way Valve
Note: This section is for reference only. Actual unit appearance may vary.