Chapter 6.0 Access Code Types
6.0 Access Code Types
The alarm system provides the following user access code types:
Code
Add User
Delete
User
Set Unset Access
Codes
User Func-
tions
Installer
Master
All
All
Yes Yes
Yes
Yes
No
User
No
No
Yes Yes
No
No
No
Supervisor
All but
Master
All but
Master
Yes Yes
Yes
Yes
No
Duress
No
No
Yes Yes
No
No
No
One-time
user
No
No
Yes 1/day
No
No
No
Installer and Master code are system codes that can be changed but not deleted. The other codes are
user-defined and can be added or deleted as necessary. By default, access codes have the same par-
tition and attribute programming as the code used to program them.
Note:
When using 8-digit access codes, the minimum number of variations are:
l
2083333 for HS2016/HS2016-4
l
1388888 for HS2032
l
1052631 for HS2064/HS2128
l
200000 for HS2064 E
l
100000 for HS2128 E
Additionally, there are no disallowed codes.
Master
Code
By default the master code can access all partitions and can perform any keypad
function. This code can be used to program all access codes, including the super-
visor and duress codes. The master code is code # [01].
User
Codes
This type of access code is used to set and unset assigned partitions and can access
the User Functions menu.
Supervisor
Codes
Use when you want to allow additional users to manage Access Codes [*5] or User
Functions [*6]. Supervisor codes created by the master code will have the same
attributes as the master code. Supervisor codes created by another supervisor code
will have the same attributes, except the supervisor attribute. Must be assigned
manually afterward. After creation, attributes can be changed for all supervisor
codes. For information on how to program a supervisor code see "Configuring addi-
tional User Options".
Duress
Codes
Use if forced to access your keypad under threat. Duress codes function the same
as user access codes, except they transmit a Duress Report to your monitoring sta-
tion when used to perform any function on the system.
Duress codes cannot be used to access Access Codes [*5], User Functions [*6] or
Installer [*8] menus. For information on how to program a Duress Code see "Con-
figuring additional User Options".
One Time
User Code
Used to grant someone one-time access to your home once per day, i.e., a cleaning
person or contractor. The ability to unset the system is reset at midnight or when
the one-time user code is keyed in by the master code user. For information on how
to program a One Time User Code see "Configuring Additional User Options".
- 14 -
firealarmresources.com
