Tyco DSC HS2LCDWF, Installation Instructions Manual

Page: 6 / 32

[022] Second Keypad Options
[023] Third Keypad Options
[030] LCD Message
[031] Downloaded LCD Message Duration
Default: 000
I_____I_____I_____I
(Valid entries are 000-255), 000=Unlimited Mes-
sage Display. This number represents the number of times the downloaded
message must be cleared before it is permanently removed.
Press any key to delete message.
[101]-[228] Door Chime for Zones 1-128
[991] Reset Keypad Programming to Factory Defaults
1. Press [*][8][Installer Code].
2. Enter [991].
3. Use the [<][>] keys to scroll to the applicable keypad.
4. Press [*] to select the keypad.
5. Re-enter [Installer Code].
6. Press [*] to reset the selected keypad to factory defaults.
Default Opt. ON OFF
ON
I______I
1 Local Clock Display ON
Local Clock Display
OFF
OFF
I______I
2
Local Clock Displays 24-
hr Time
Local Clock Displays
AM/PM
ON
I______I
3 Auto Alarm Scroll ON
Auto Alarm Scroll
OFF
OFF
I______I
4
For Future Use For Future Use
OFF
I______I
5
Power LED Enabled Power LED Disabled
ON
I______I
6
Power LED Indicates AC
Present ON
Power LED Indicates
AC Present OFF
ON
I______I
7
Alarms Displayed While
Armed
Alarms Not Displayed
While Armed
OFF
I______I
8
Auto-Scroll Open Zones
ON
Auto-Scroll Open
Zones OFF
Default Opt. ON OFF
OFF
I______I
1
Armed LED On in
Sleep Mode
Armed LED Off in Sleep
Mode
ON
I______I
2
Keypad Status Shows
Stay Arm
Keypad Status Shows Stay/
Away Arm
OFF
I______I
7
Temperature Display
Enabled
Temperature Display Dis-
abled
NOTE: Programming options indicated in GREY are required for systems com-
pliant with EN50131-1 and EN50131-3 standards. Section [023]: 1=OFF
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____|
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____|
[041] Indoor Temperature Zone Assignment
Default: 000
I______I______I______I
(Valid entries are 000-128)
[042] Outdoor Temperature Zone Assignment
Default: 000
I______I______I______I
(Valid entries are 000-128)
The keypad can be programmed to make up to four different chime
sounds for individual zones. (e.g., for Zone 1, enter Section [101], for
Zone 2 enter Section [102]).
Default: 01
I___I___I
Option
01 6 beeps
02 Bing-Bing tone
03 Ding-Dong tone
04 Alarm tone (4 second duration)
05 Zone name