2G Alarm Communicator Installlation Manual
System Reset Defaults
25
[996] Cellular Telephone Number
NOTE:
This Section will display the Cellular telephone number of the SIM. This telephone number is required by the Installer for DLS
and remote firmware (flash) update. User can access this telephone number by entering [*] [6] < > “Cellular Phone No.” to dis-
play the phone number.
[997] IMEI Number
This Section will display the unique 15 digit International Mobile Equipment Identity (IMEI) of the radio. Format is: Reporting Body
Identifier (2 digits), Allocation Number (4 digits); Final Assembly Code (2 digits); Serial Number (6 digits); and a check digit.
[998] MAC Address
This Section will display the unique12 digit, hexadecimal number assigned as the Media Access Control (MAC) address of the device.
S
YSTEM
R
ESET
D
EFAULTS
[999] Software Default
Default (99)
The Software default allows the installer to refresh the unit after changes and also return the Communicator to the default state.
00
:
Default Module
. All programming Sections in module revert to factory settings. This will erase all existing programming of the
unit.
55
:
Reset
. The Communicator is reset. This option is equivalent to power cycling the Communicator.
firealarmresources.com
Summary of Contents for DSC GS2055
Page 2: ...firealarmresources com...
Page 35: ...firealarmresources com...
