1
Introduction
The 3G3070-CF is a wireless communicator for UL commercial fire and/or burglary applications. The
3G3070-CF can send status change events information over the 3G (HSPA) or 2G (GPRS) Network from
the Alarm Control Panel at the protected premises to a supervising station. The device is compatible with
UL listed alarm receiver Models SG-System IV, SG-SYSTEM III (using SG-DRL3-IP line card), SG-
SYSTEM II and SG-SYSTEM I.
This product is UL listed under requirements of UL864 9th Edition and UL1610 Standards as a Fire Alarm
Communicator for central station service fire alarm – commercial and it can be installed in certified
installations in accordance with the requirements of UL827 Standard and NFPA72 2002 (Section 8.5.4
Other Transmission Technologies), NFPA72 2007 (Section 8.6.4 Other Transmission Technologies) or
NFPA72 2010 Code (Section 26.6.3.1).
Features
• Compatible with listed alarm control panels that have an integrated DACT and support a 4 or 10-digit
Contact ID Communication Format
• Complete solution CF Kit includes tamper protection output, listed power supply and battery standby
capability for 24h
• Telephone line overvoltage protection and monitoring with automatic switch over to the 3G (HSPA) or
2G (GPRS) network communication path when a phone line trouble condition exists
• 3G (HSPA) or 2G (GPRS) network connection and signal strength indicator
• 4 Input lines and 4 Open collector outputs available for interfacing with the alarm control panel
• Internet/Intranet IP communication over the 3G (HSPA) or 2G (GPRS) network.
Technical Specifications
Input Voltage: ..................................................................................................... 120V/60HZ/0.3A
Standby Voltage: ............................................................................................................. 12V/7Ah
Standby Time: .......................................................................... 24h (NSC) plus 5 minutes alarm
Standby Battery: ...................................... Sealed, rechargeable type, replace every 3-5 years
Low Battery Trouble Indication Threshold: .................................................................... 11.5V
DC
Battery Deep Discharge Protection (cut-off) ................................................................... 9.5V
DC
Recharging Current: ............................................................................................. 700mA (max.)
Inputs: .................................................................................... 12V/1mA, 4 available, supervised
Outputs: ............................................... 12V/50mA, 4 open-collector available, not supervised
Loop Resistance:1k ohm
(max. loop resistance between devices connected in series on T1/R1)
Operating Frequency: .................................................. 850/1900MHz (Dual Band GSM Radio)
Antenna Gain: ......................... 1.5dB (product shall be used only with the supplied antenna)
Operating Temperature: ....................................................................... 0
º
C - 49
º
C (32
º
F - 120
º
F)
Humidity: ......................................................................... 93%RH maximum (non-condensing)
Metal Enclosure: red, with hardwired transformer and high voltage connection box included
Dimensions: ........................................................ 290mm x 254mm x 75mm (11-1/2" x 10" x 3")
Weight: ................................................................... 5.8Kg (12.8 lbs) (including standby battery)
This equipment, 3G3070-CF, is fixed and shall be installed by Service Persons only (Service Person is defined as a
person having the appropriate technical training and experience necessary to be aware of hazards to which that
person may be exposed in performing a task and of measures to minimize the risks to that person or other persons)
according to the local rules and regulations. It shall be installed and used within an environment that provides the
pollution degree max 2, over voltages category II, in non-hazardous, indoor locations only. This manual shall be
used with the Installation Manual of the alarm control panel. All instructions specified within that manual must be
observed.
WARNING: The metal shell of the RS232 connector is not earthed! Before connecting to this port,
check the metal shell for HAZARDOUS VOLTAGES!
firealarmresources.com
