2. INSTALLATION
2.1. Installation
1.
Open plastic cover screw.
2.
Using Philips screwdriver, remove screw and remove cover.
3.
Optional step: Hang back unit with a screw on mounting surface to
make the next step (drilling marking) easier.
4.
Mark for drilling.
5.
Drill 5 holes.
6.
Fasten with 5 screws.
7.
Release catch (A) and open battery cover (B).
8.
Connect the two connectors in their respective sockets.
9.
Insert the battery and connect the battery connector.
A.
Mounting surface.
B.
For tamper.
C.
Self-Test button.
D.
Enroll button.
E.
Primary battery.
F.
Battery connector.
Caution!
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used battery according to manufacturer's instructions.
Figure 2: Installation
D-308696 BW-SRO Installation Guide
2
