B
Snap attack tail!
With Shell Shocker ™ in explore mode (all shell armor
open outward) push both buttons up to drive forward.
When you hit full speed, quickly jam both buttons
down. Your vehicle will snap attack with its tail!
*
Note: In this mode the tail will come down fast!
Keep feet, fingers and anything that breathes away
from Shell Shocker™
C
Defender bender!
With Shell Shocker ™ in explore mode (all armor open
outward) push the left button up and the right button
down. As the Shell Shocker™ spins press the bottom
left toggle switch beneath the transmitter. The shells
will begin closing even as the Shell Shocker™ spins
frantically about! Now open it up mid spin by pressing
the right toggle switch beneath the transmitter.
III.
HOW TO BRING MY SHELL SHOCKER
™
TO LIFE!
Requires a 7.2v Tyco
®
Pro FlexPak
®
(NiMH) battery
pack for vehicle and a 9v battery for transmitter .
Vehicle
1. First turn Shell Shocker upside down, tail facing you.
2. Now unscrew the battery compartment cover
(screwdriver not included).
3. Hold the Tyco
®
Pro FlexPak
®
battery pack(not included)
facing up as shown.
4. Now slide the battery end marked #1 down into the
battery compartment. Before you press down on the
battery pack make sure to place the ribbon under-
neath the battery for easy pull out later.
5. To remove the battery, unscrew the battery door, pull
on the ribbon and lift out the battery.
Transmitter
1. Open the battery door as shown.
2. Install one 9v battery (not included) with polarity (+/-)
as shown inside the battery compartment.
3. Close the battery door.
1
2
B
C
7.2v d.c. NiMH,
6 x Sub C,
1600 mAh
(not included)
