7.2 v d.c.
7.2 v d.c.
III. BATTERY INSTALLATION
There are two power sources: a 7.2v SubC NiCd rechargeable
battery pack (which powers all the driving and turning)
and a 4 AA alkaline battery pack (which powers the lights
and sounds).
For detailed information regarding rechargeable battery
charging and safety, please refer to the “Battery
Charging/Care” section.
Vehicle
For lights and music sounds position battery installation:
1. Use a screwdriver (not included) to unscrew the power
clip cover screw, open the battery cover as shown.
2. Install 4 AA alkaline batteries with polarity (+/-) as shown
inside the battery compartment.
3. Replace the battery door.
For driving battery installation:
1. Rotate the battery door latch to the unlocked position
and open the battery door.
2. Insert the charged battery pack into the battery
compartment as shown.
3. Connect the battery pack’s wire connector to the vehicle’s
charging jack as shown. Make certain the connector is
securely connected.
4. Close the battery door and rotate the battery door latch
to the locked position.
Transmitter
1. Remove the battery cover as shown.
2. Install 2 AA alkaline batteries with polarity (+/-) as shown
inside the battery compartment.
3. Replace the battery door.
II. VEHICLE OPERATION
FORWARD
Slam steering control: Left & Right turn activation
turning motion activates turn signal lights.
Throttle control: Forward & Reverse motion activation
Forward & Reverse motion activates headlights & fender lights
Forward & Reverse motion activates cruise tune (from internally
stored music). Vehicle drives in low speed when a music player
is pluged in.
Brake lights activate when the trigger switch returns to the
neutral position.
REVERSE
LEFT
RIGHT
