MM-010019-001, Rev. B
47
10 DATA-ONLY
RADIO
CONNECTIONS
The Data-Only configuration of the radio has no control head. The only difference in connections from an
installation with a control head is with respect to ignition sense wiring. For a Data-Only radio, follow the
procedure described in Section 8.2, except make the connection of the white wire of the
radio’s
DC
Power Cable as detailed in the control head Section 9.4.2.1 (page 44) or Section 9.4.2.2 (page 46).
The ignition sense is the only means for turning the Data-Only radio on and off. The
“hot wired” configuration cannot be utilized for the Data-Only radio, since this
configuration does not employ the DC Power Cable’s white wire.
