9
3.7.1
Tray for up to 24 heat-shrinkable fusion splice protectors is
used (FOSC-A-TRAY-S24).
3.7.2
Remove front cover. Open tray 90°.
3.7
Routing and splicing
3.7.3
Rotate the FOSC-tray ± 45°.
•
The tray organizer has 6 locations to store splice protectors. Each
location can hold maximum 4 fusion splice protectors of type SMOUV-
1120-02 (length 45 mm, installed outer diameter is 2,4 mm)or
equivalent.
•
After each splice is made, the splice should be stored as indicated
on the drawing. First protector in position 1,the second in position 2.
Continue for other fibers. Fiber nr.5 will be in position 1 of next
location.
•
If splice protectors are stored on the side with the 4 locations, the
fibers from the locations on the outside are first guided through the
passage between the locations and then coiled into the tray.
Summary of Contents for FOMS-FSP-O Series
Page 11: ...11...
