Instruction Sheet
408-78172
Rev. A
4 of 8
3-2 Instruction for cable connection (Fig.4)
Set the hook of opener(2347681-1) to the opener hole.
Set the hinge of opener(2347681-1) to the spring slot.
Push the opener(2347681-1) until
cable insertion hole opens to the required size.
Do not push strongly, there is possibility of damage to opener (2347681-1) and Receptacle
Assembly.
*About 30N is enough for AWG14 cable.
Insert the cable to cable insertion hole. (Fig.4)
1) Cable insulation Diameter < 2.4mm
The cable should be inserted until aligning cable insulation and end of guiding taper straight line.
2) Cable insulation Diameter
≧
2.4mm
The cable should be inserted until cable insulation contact the guiding taper.
Opener (2347681-1)
Set hook
Set hinge Push opener
Open Cable Insertion Hole
Insert cable
Fig.4
cable connection (Cont.)
Opener Hole
Hook
Hinge
Cable Insertion Hole
Spring Slot
