408-10091
CPC Series 45 Unshielded Pass-Through Receptacle Kit 1776186-1
Rev B
2 of 2
Tyco Electronics Corporation
4. Insert the receptacle assembly into the panel
until the flange seal is flat against the panel. See
Figure 4.
5. Thread four No. 4 screws into the mounting
holes, and tighten until secure.
Figure 4
No. 4 Screw
(4 Places)
Front of
Panel
Flange Seal Flat
Against Panel
Note: Front Panel Mount Shown
Panel Mounting
4. REPLACEMENT AND REPAIR
Components of the receptacle kit are not repairable.
DO NOT use defective or damaged components.
5. REVISION SUMMARY
Revisions to this instruction sheet include:
S
Updated document to corporate requirements
