Page 18 / 18 ECOC: EGC0 ; LOC: AI
PN 9-744012-3
412-18799 Rev.C
Note:
In case of an operating fault the hand pliers can be opened prematurely by unlocking the integrated
ratchet. Therefore the handle is slightly pressed together and at the same time the ratchet release is
turned in direction of the arrow. After that the handle can be opened fully (see figure 12).
Figure 12
5. In the end the handle is opened and the connector with the pressed in wires may be removed (see
figure 13).
Figure 13
8 Maintenance and preventive maintenance
Prior to operation the tool must be in a proper and clean condition. Any residues should be removed.
The joints should be oiled regularly with light precision mechanics oil and protected against soiling.
Once the hand tool is no longer required it should be stored, dry and clean, in the case provided.
Recommended inspection, adjustment and lubrication interval: 10.000 operations
