Page 15 / 18 ECOC: EGC0 ; LOC: AI
PN 9-744012-3
412-18799 Rev.C
Figure 4
3. Now the handle is closed slightly, whereby the pressure piece may not touch the housing (1. or 2. grid
position). Thereby the two ejectors move down in order to be able to insert the wire (see figure 5).
Figure 5
7 Operation
1. At first the connector is equipped with the wires. Pay attention that they are to be held slightly angled
see figure 6 and 7). They are pushed to the stop inside the connector (see figure 9 and 10).
